Z4 rear hub

[ngampleh]

1 set sold to BMWSAAB !!!

last stock a pair bracket..

[ngampleh]

thank you Steve.. chicks pic on the way..

[blunttech]

Nice work Hita. Looks great.

[ngampleh]

Can you pm me the distance between the mounting holes to the trailing arm? I have a z3 rear end and would be interested in seeing if this would bolt up. Thank you

here I tried put on z3 trailing arm

[ngampleh]

you mean distance between caliper carrier to trailing arm?

[rkettner]

Can you pm me the distance between the mounting holes to the trailing arm? I have a z3 rear end and would be interested in seeing if this would bolt up. Thank you

[ngampleh]

Z4 rear hub



2 sets available

[ngampleh]

Is this bracket for z4 rotors and 330i calipers on a Ti rear end?
If so how much are they each? And shipping to Sydney 2206?
I have standard Ti hubs..
Cheers
Sash

not for TI rear end...
this bracket is to adapt e46 325/328i or 330i rear calipers on stock e30 trailing arm with z4 (e85,e86,e89) or e91/e91 hubs.
here the ref for hubs

http://www.realoem.com/bmw/enUS/partxref?q=33416752381

a pair of bracket 130 usd shipped (paypal fee on buyer/send money)
idk the Ti hubs dimension is...
but if you can give some measurements, I can figure it out

cheers too
from neighbor country
:D

[MR_SAZ]

yes, I have 4 sets..

1 set sold to 01012011 - paid
1 set sold to e30m3s54turbo - paid
2 sets available

Is this bracket for z4 rotors and 330i calipers on a Ti rear end?
If so how much are they each? And shipping to Sydney 2206?
I have standard Ti hubs..
Cheers
Sash

[ngampleh]

sell me some adapters?

yes, I have 4 sets..

1 set sold to 01012011 - shipped
1 set sold to e30m3s54turbo - shipped
2 sets available

[ngampleh]

Why not just use z3 hubs, rotors and calipers. it's all a direct bolt on. I can attest to the wides.....I have same setup.

because z3 is solid rotor and only have 272mm diameter..
with e46 325i (294x19mm) or 330i (320x22mm) you can have more brake torque and ventilated..

or custom 2pcs (rotor and hat)
I build 328x20mm with Alpina B8 wheels 17x9

[brainfood]

Why not just use z3 hubs, rotors and calipers. it's all a direct bolt on. I can attest to the wides.....I have same setup.

Which model Z3 did yours come out of though? From my understanding the 4cyl models are just a 318ti rear, with the smaller wheel bearings and axles, and then the 6cyl cars are normal size, but the track is a little bit wider (Not the end of the world). Then, the Z3M is actually the correct width, but finding one is impossible.

[325est13psi]

im going to just stay 4 lug due to wheel choice and price, i purchased a weld on bracket for a second caliper for the hydro that is currently inline

[IronFreak]

Why not just use z3 hubs, rotors and calipers. it's all a direct bolt on. I can attest to the wides.....I have same setup.

[jalopi]

they're nothing fancy (two holes on the right are the mounting holes for the e30 caliper brackets. the outer two are for the e46 330i brackets. see why they're not bolt on like so many people claim?)





buy my z3 hubs and i'll throw em in for free.

but honestly if you just want a wider rear track i would do the z4 setup plus spacers. but it's your call, just let me know