Announcement

Collapse
No announcement yet.

e36-e30 5 lug swap LCABs. any interest in an aftermarket?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    e36-e30 5 lug swap LCABs. any interest in an aftermarket?

    Hey guys,
    I am doing my 5 lug swap. I have used all the parts off a late e36 m3. so control arms, spindles, and then the offset LCAB from the 95.

    I am not happy with the placement of the wheel in the arch. So, I have decided to make some LCABs based on the treehouse racing ones. But these have more offset to get the hub more center.

    I will get pictures up as soon as I can. I was just curious if anyone might be interested in a set. I am making 3 sets. one for me. One for my friend, and one to sell off.

    Mine are already done, they arent pretty but they should work.

    #2
    [IMG]New LCABs by the_captainkudzu, on Flickr[/IMG]

    Comment


      #3
      [IMG]New LCABs by the_captainkudzu, on Flickr[/IMG]

      [IMG]New LCABs by the_captainkudzu, on Flickr[/IMG]

      [IMG]LCABS by the_captainkudzu, on Flickr[/IMG]

      Comment


        #4
        the last 2 pictures are the before and after pictures of the 2 different LCABs

        Comment


          #5
          Some of the pics aren't workin champ.

          I think there is a market for this for sure.

          Comment


            #6
            I dont really know how to put the pictures up. I tried using my flikr account.

            They work on my machine.

            there are only 4 pictures.

            Any advice?

            Comment


              #7
              Nevermind, they're all working now that I'm on my laptop.

              What would you sell this for?

              Comment


                #8
                I think $150 is a good price point.

                Comment


                  #9
                  Can you guarantee its durability?

                  That's the only thing I'd be concerned about when buying these.

                  Comment


                    #10
                    Im not sure I can guarantee anything, but I will work to make it good if it were to break or wear out prematurely. I think my only concern with the whole thing is longevity of the bushing. So, if the bushing wears out super quick, I can send you a replacement set.

                    Remember this is a prototype.


                    I just made mine and just installed them 3 days ago and just drove the car for the first time since november.

                    It drives great and feels pretty awesome. The turning radius is as it was before I did the suspension swap. for instance, I went for a drive with a buddy who did the e30 M3 swap. I am able to turn around in a parking lot or in the road much easier than his, it seemed.

                    Comment


                      #11
                      So what material did you use for the bushing?
                      87 325i Coupe - Sold
                      95 M3 Track rat - Sold
                      87 325i Vert - Sold
                      87 325is S52 swap - Sold
                      99 M3 (Estoril) - Sold
                      03 525i Touring - Current
                      03 325i Touring (Mtech Conv) - Current
                      88 325i Vert - Current

                      Comment


                        #12
                        currently i am using acetal.

                        "Wear- and Water-Resistant Delrin® Acetal Resin
                        Considered the workhorse of plastics, Delrin® acetal resin combines moisture resistance and a slippery, wear-resistant surface with an ability to hold tight tolerances. Also known as acetal homopolymer, it's often used for gears, bushings, impellers, and other parts that require its strength and rigidity."

                        Comment


                          #13
                          hmm k
                          Pretty expensive for stuff that has no guarantee
                          87 325i Coupe - Sold
                          95 M3 Track rat - Sold
                          87 325i Vert - Sold
                          87 325is S52 swap - Sold
                          99 M3 (Estoril) - Sold
                          03 525i Touring - Current
                          03 325i Touring (Mtech Conv) - Current
                          88 325i Vert - Current

                          Comment


                            #14
                            Fair enough. I m just a guy making a part. I am not Bimmerworld. so I cant guarantee the product.

                            I think the price is fair for my time and material cost. If you think $150 is too expensive. make them for your self.

                            Comment


                              #15
                              Originally posted by _Keith_ View Post
                              hmm k
                              Pretty expensive for stuff that has no guarantee
                              There is somewhat of a guarantee..

                              Originally posted by Artful Dodger View Post
                              I will work to make it good if it were to break or wear out prematurely. I think my only concern with the whole thing is longevity of the bushing. So, if the bushing wears out super quick, I can send you a replacement set.
                              $150 isn't bad considering the THR eyeballs are like $180? And these give even more caster to correct for 5 lug swaps.

                              I would have already jumped on this if I decided to do a 5 lug swap.. but I think I'm staying 4 lug.

                              Comment

                              Working...
                              X