[ETA - E30 Adapters] 5 Lug kit with e46m3 front and e46 325/328i rear brake setup

[Chu346]

What is used to secure the hub nut on the rear?

[ngampleh]

What is used to secure the hub nut on the rear?

No need to secure, been used it this 2.5 yrs daily and zero issue..

[Chu346]

Why does the e30 use a locking plate? Would you say that isn't needed either?
Are you using the e30 nut?

[ngampleh]

Why does the e30 use a locking plate? Would you say that isn't needed either?
Are you using the e30 nut?

Because its used z4 hub? There is no groove on it for locking plate..
I didnt used it because used z4 hub + e30 half shaft + e30 nut..
E30 locking nut system not same with e36++ or z4..

[Nelsson]

Do you still sell the rear bracket alone?

[ngampleh]

Do you still sell the rear bracket alone?

Yes, I do

Sent from my SM-A310F using Tapatalk

[Calum_b198]

Hey, did you find a way to make the adaptors work with the Z4 hubs and the rear 330i calipers and discs?

[ngampleh]

Hey, did you find a way to make the adaptors work with the Z4 hubs and the rear 330i calipers and discs?

check this...

http://www.argyrides.eu/bmw/mods/330_rear_brake/rear_brakes.htm

There are 3 solutions available for this retrofit.

1. Find the entire rear e-brake/hub assembly of a 330 and transplant it, which is expensive and not worth it imo.

2. Fabricate a spacer and press it/weld it inside the 330 rotor to create a smaller drum diameter so that the original e-brake can work. Not good because it will add more weight to the already heavy rotor, it will throw rotor off balance, and each time a rotor will need replacing, a new spacer must be manufactured. Also, difference in materials used will probably create a problem with heat expansion.

3. Fabricate custom brake shoes, with the mounting base of a 320/23/25/28 and the proper length to reach the standard 330 rotor drum diameter. I chose to follow this method for the following reasons:

[JOMARO]

49_resize.jpg[/img]

Parts that you need beside the adapter kit are...
>> Front :
1. e46m3 calipers left + right - (a pair)
2. e46m3 brake pads - 34112282416 - (x2)
3. e46m3 caliper bolts - 34116767217 - (x4)
4. e46m3 rotors left - 34112229529 - (x1)
5. e46m3 rotors right - 34112229530 - (x1)
6. e36/46 wheel hubs - 31226757024 - (x2)

-

Can We Use the E46 M3 Wheel hubs (31222229501) instead of the e36/e46 hubs ?

[ngampleh]

Can We Use the E46 M3 Wheel hubs (31222229501) instead of the e36/e46 hubs ?

Sorry... I never tried, since there is no e46m3 in my local junkyard..
and I don't have deep wallet to buy new one..

Looks your wallet is pretty deep...
Want to use new e46m3 hubs :D

[Supafly]

Pm

Hi,

I sent you a PM but don't know if you have received it or not.

Please check. Ready to order.

Thank you

[ngampleh]

Hi,

I sent you a PM but don't know if you have received it or not.

Please check. Ready to order.

Thank you

PM replied..

Sent from my SM-A310F using Tapatalk

[ngampleh]

rear bracket still available

[itsonlygeorge]

[ETA - E30 Adapters] 5 Lug kit with e46m3 front and e46 325/328i rear brake setup

Sent from my iPhone using Tapatalk

[E30335i]

Is there a thread dedicated to your 5 lug of people showing off their wheel set ups?


Sent from my iPhone using Tapatalk