Style 32's for e36 5-lug conversion?

[JoeMadoo]

17x9s will fit under Kamotors flares with 255s. Using e36 hubs on e30 spindles with the hub adapters, and Z4 hubs rear

Nicely done.

[ATL_E30]

Anyone have any insight on 16in Style 32's? There's a cheap set i'm think about picking up and i'd running adapters with them right now, but will be looking to do a 5 lug swap this year.

[CoreyZ]

17x9s will fit under Kamotors flares with 255s. Using e36 hubs on e30 spindles with the hub adapters, and Z4 hubs rear

[VBe30]

^ I agree

[LowR3V'in]

i have a set in my garage.
The best way to do it is the 5lug hub adapter but that guy doesn't sell it anymore.

so guuud. ;/

I can dream by jet jones, on Flickr

[clavinZERO]

Lol. That is my aunt’s house. Used to live there for a few years. That lawn does looked photoshopped it is so nice. Haha. I will have to tell her.

[MCreally?]

don't you know I am the poster child for this wheel choice? I mean, I am kind of a big deal here on R3V, lol jk.

I came here to see what an e30 would look like on style 32 wheels, and left envious of this guys manicured lawn.

[aziza z]

clavinZERO:

Do you know if it would be possible to run the style 32 in 17x8 (et20) and 17x9 (et22) with your suspension setup?

The people who seem to run these wheels are on e30 5 lug swap parts. Would the E36 M3 front and Z3 rear setup not work with these wheels? Is there any other swap that would allow for those wheels?

Thanks for your help.

[clavinZERO]

http://www.r3vlimited.com/board/showthread.php?t=92256

:up:

:p

[atomic]

Are you running e36 or e30 parts? Those wheels are perfect...

http://www.r3vlimited.com/board/showthread.php?t=92256

:up:

[ethirdy]

Are you running e36 or e30 parts? Those wheels are perfect...

don't you know I am the poster child for this wheel choice? I mean, I am kind of a big deal here on R3V, lol jk.

[daniel]

Factory E36 stuff should be that offset and diameter, but 8" wide might be hard to find in for a 16" wheel. Especially factory wheels.

its true, but the only factory 16x8 stuff comes from 7-series cars, and therefore the wrong offset and CB. I am still tempted to get some hubcentric rings and put some et23 style 4's or 5's on my car and see how they fit. i would sacrifice having to raise my car or do some major fender rolling to have some style 4's on there.

edit for anyone who reads this: only the e39 CB is different. the 7-series wheels work, but have a very low offset.

[clavinZERO]

Factory E36 stuff should be that offset and diameter, but 8" wide might be hard to find in for a 16" wheel. Especially factory wheels.

[daniel]

don't you know I am the poster child for this wheel choice? I mean, I am kind of a big deal here on R3V, lol jk.

fap fap fap fap

i still might try those on mine, but i am going to try to do something different first. i wish there were 16x8 et40ish wheels. know of any?

[clavinZERO]

don't you know I am the poster child for this wheel choice? I mean, I am kind of a big deal here on R3V, lol jk.