Announcement

Collapse
No announcement yet.

1989 E30 Sedan - Suspension refresh - Need help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    1989 E30 Sedan - Suspension refresh - Need help

    Hello all,

    Finally, I'm back to the E30 community. Our family recently picked up a 1989 E30 325i sedan and shipped it back to Long Island, NY from the west coast.
    The car comes with BC coilovers with 32 ways adjustments which is not in my liking(at least my kidneys are not liking the ride on NY roads). So since the car passed NYS Salvage Vehicle Examination last week due to it had Cali salvage title.
    Long story short, I am planning to upgrade most if not all the suspension parts and give a refresh suspension. Hoping to enjoy the drive as the E30 will be my weekend car to drive or to car meets. Not planning to do track/autocross.
    Here is the list of parts I'm planning to purchase and install. Can someone with knowledge confirm these will work? Please let me know if i am missing other parts while I'm already doing this. Full tune up will be next in coming fall/winter.


    Front shocks: KONI 8641 1021SPORT
    Rear shocks KONI 80 2522SPORT
    Lowering springs: H&R Sport 50404-55
    ECS Complete Front & Rear Suspension Rebuild Kit:

    Front:
    Lemforder Front lower control arms
    Solid rubber E36 M3 front control arm bushings for improved handling and steering feel
    Lemforder Front sway bar end links
    Sachs Front strut mounts
    Lemforder Inner and outer tie rod assemblies
    All required retaining hardware

    Rear:
    Rear trailing arm bushings
    Rear stabilizer links
    Rear shock mounts - upgraded units from the E46 M3
    ECS rear shock mount reinforcement plates for improved mount life and protection from shock mount deformation
    Rear shock mount hardware and gasket
    Rear subframe mounts
    Differential bushing


    Regard

    Zac
    Rule of Thumb:

    Work Hard, Drive Hard ! ;)

    #2
    I *might* be interested in your coils if they haven’t already been spoken for. I’ve been leaning towards GCs for my project, but wouldn’t mind spending on a used set of BCs to see how I like them if you’re interested? Sent from my iPhone using Tapatalk

    Comment


      #3
      Originally posted by E30auddie View Post
      I *might* be interested in your coils if they haven’t already been spoken for. I’ve been leaning towards GCs for my project, but wouldn’t mind spending on a used set of BCs to see how I like them if you’re interested? Sent from my iPhone using Tapatalk
      That may work. PM me. I just need sort out the parts I need before removing the BC. The BC set up is probably less than 500 miles. More than 500 miles if including the transport from Cali to Long Island. lol
      Rule of Thumb:

      Work Hard, Drive Hard ! ;)

      Comment

      Working...
      X