Installing suspension, need help

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • RedBaron86325
    Grease Monkey
    • Oct 2003
    • 386

    #16
    Originally posted by Jordan
    If the car is on jackstands, and the trailing arms are at full droop with the ebrake off.... you can pull the springs out easily by hand.
    Yep, you may need to turn the spring a bit, but they'll come out by hand.
    Don't forget the good things Hitler did.

    Comment

    • krisco
      Advanced Member
      • Oct 2003
      • 180

      #17
      Thanks everyone for you input and advice. I just finished about 1.5 hours ago and, of course, took it for a ride. Everything seems to be in order. I'll try to take some pictures whenever I can. Again, thanks.
      Kris

      Comment

      • Bahnstorminge30
        Noobie
        • Oct 2003
        • 31

        #18
        To get the rear spring out all I did was use a good ol' crowbar. Popped them right out. It was weird since I went 2.5inches down the new springs were so damn small it took alot of maneuvering and another jack to get them to sit in there correctly. But glad to here your is coming along
        Peace
        Pete

        Comment

        Working...