If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I just got my offset bushings from bmwbushings.com and I'm wondering what the deal is with installing them? What orientation does the control arm hole need to be in?
I managed to get one in most of the way, but I needed to get them pressed the rest of the way. Napa has the press in the machine shop, about 15 to get the job done.
The white part of the delrin insert goes towards the front of the car, the hole towards the outside of the car.
=={O } -- Like that, if you get me. Make sure you align the center of the hole with the lump that will be on the other side of the bracket.
With all that, they should have sent you directions. I got some with my CABs.
Comment