iX booster/master

[Jean]

Hello, what is the distance between the two studs on the booster for the MC?

Thanks

[Kilawin]

Dont know the exact dimension, but some info here on what will fit on it.

http://www.r3vlimited.com/board/showthread.php?t=134210

Doh! I went to get that same booster but it was gone.;)

[Jean]

Ok, that confirms it...the spacing on the ix MC is not the same as on regular e30 MC.

I now have two of these boosters, and both don't fit my brand spanking new non abs e30 MC... DOH

So I must use either the iX or 735 MC.

[MR 325]

So I must use either the iX or 735 MC.

You are correct sir.

[g22]

e34 m5 works as well

[Jean]

You are correct sir.

I wonder if it will work in my car since I don't have abs....

[MR 325]

I wonder if it will work in my car since I don't have abs....

Should work fine. Hooking up the lines may be a different story.

[Jean]

Non abs MC has 3 lines, abs has only two. Going to make it work by adding a T.

[Mossman]

Not only is the spacing different but I'm sure you've noticed it's also at a diagonal.

News flash - e36 masters work. E36 M3 masters are in the 24-26mm range, with 95's being smaller and the rest being bigger, not sure where I found the exact #'s from before but I did...now I can't find it anymore, but from memory regular e36 is 23.x, 95 m3 25.x 96-99 m3 26.x something like that