Announcement

Collapse
No announcement yet.

camber on the rear end

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    camber on the rear end

    how can i fix the camber on the rear end of my e30 with a 2 inch drop?
    sigpic

    #2
    You don't.
    1985 M10b18. 70maybewhpoffury. Over engineered S50b30 murica BBQ swap in progress.

    Originally posted by DEV0 E30
    You'd chugg this butt. I know you would. Ain't gotta' lie to kick it brostantinople.

    Comment


      #3
      well how bad will be the camber be?????
      sigpic

      Comment


        #4
        you can buy a weld in kit to fix camber in the rear

        bavauto or ireland engineering sells them
        -Andy

        Comment


          #5
          Who would wanna fix camber?

          Comment


            #6
            well how bad will the camber be????
            sigpic

            Comment


              #7
              Originally posted by Holland View Post
              You don't.
              Originally posted by red325 View Post
              Who would wanna fix camber?
              ^should not be answering questions on suspension

              OP, there is a curve of the suspension travel someplace on the internet, I don't have the link on my work computer. At 2" drop you are going to have a decent amount of geometry change in the rear end. As previously stated get the weld-in eccentric bolts from IE. Other option is for eccentric bushings but those suck and you will kick yourself for getting them.
              sigpic
              '86.5 325eis Track Ho | '08 128i DD | '04 Silverado Tow Vehicle

              Comment

              Working...
              X