Arms/Bushings/Control links/Tierods/Subframe

[ThreeTwentyFissel]

*** I have all of the above replacement part ready to be thrown in the car. I have doughts on how the lolipop bushing arrow should be pointing? Am using the M3 bushing, any other things I should be careful on?

[SkinnyVT]

arrow should point at the line on the lollipop, the goal it to move the rear of the control arm closer to the "frame" rail therefore moving the outter balljoint forward = more caster.

[ThreeTwentyFissel]

Thanks (Skinny)... I just had my alignment done, the whole thing was a walk in the park. I should post pic's of the whole process for anyone else to referrence too!