Uneven brake wear

[Gamotua]

So, this morning I removed front brakes. Drivers side rotor and pads look good, pass side was down to metal. Now, the drivers side caliper piston was not pushed out. Pass side I had to c-clamp to compress. Should I be looking for another issue on drivers side? It didn't pull under braking... So ... Yeah. That's my question.

Thanks in advance.

[jlevie]

The passenger side caliper could be binding, there could be a bad soft line on either side that is obstructing flow to the left caliper or return from the right caliper, or you could have a problem in the ABS unit. I'd start with the soft lines and calipers.