Announcement

Collapse
No announcement yet.

Ok did my alignment today....

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Ok did my alignment today....

    It was slow as hell at work today so i took off my bumper and put the car up on the rack to see just how bad the alignment is.

    And it looks like every bushing on the car must have gone to shit.

    Rear: First of all camber is at -3.7* in the rear with only a 1.5 inch drop in the back. Caster is off slightly, and toe is bad on one side.

    Front: Aparently the only place where there is any actual adjustment on our cars. Toe straightened out. Camber not much out of spec. Caster is quite a bit out.


    So what things should be replaced to try and pull things back together?

    #2
    it sounds like maybe rear subframe problems

    Comment


      #3
      Are you saying the longer I do not do my alignment the worse my bushings will get?

      Damn I need to get to a shop...
      Reminiscing...

      Comment


        #4
        I agree with Jon that it's probably slightly bent rear arms/subframe or completely trashed bushings. Has your car ever been in a wreck? A tweaked chassis will cause these alignment problems, as I've found out with my 318. Do you have a full sheet of specs by chance?

        Comment

        Working...
        X