rear camber messed up.. need help!

[gilera_200]

Hi guys,

My rear cambers are messed up. Right side is perfectly tuck in, while the left side is almost square and always rub with my rolled fender. Btw, I'm using 16x9 wheels with 225/45/16 tires. Do bare in my that the right side never rub. Fyi, I've just changed all the bushings for the rear but my problem still not solved. Any suggestions of what i should do? replace the rear trailing arm perhaps? Oh before I forgot the car was never been in an accident before.

[325issguy]

Inspect your trailing arm, subframe, and the bushings on both... Bushings can cause bad alignment as well as a bent part.

[gilera_200]

Inspect your trailing arm, subframe, and the bushings on both... Bushings can cause bad alignment as well as a bent part.

bushings are all new.. changed it last week

[jlevie]

If you have replaced the rear trailing arm and subframe bushings and still have incorrect camber, you have a bent trailing arm. The usual cause of that, in the absence of a prior accident, is that wheel loosing an argument with a curb.

[gilera_200]

If you have replaced the rear trailing arm and subframe bushings and still have incorrect camber, you have a bent trailing arm. The usual cause of that, in the absence of a prior accident, is that wheel loosing an argument with a curb.

will have a look on that :) thank you very much