S54 swap what brake booster

[Fede/bmx1]

I was just wondering what brake booster you guys recommend for the S52 swap. I'm not too sure which brake booster is on there since I just got the car, the brakes make it stop but not too well. I was looking through http://www.treehouseracing.com/ and noticed that there are only brake boosters for M50 conversion. will this one work?
EDIT******S52 swap. Sorry guys,

[Farbin Kaiber]

Dude, shrink your sig pic.

And, there are multiple options, manual brakes and or slotting the mounting points is one.

Here is a pic to visualize.

http://www.r3vlimited.com/board/showpost.php?p=2326192&postcount=6

[Fede/bmx1]

Thanks, I will look up on it.

[rThor432]

I used the stock one with my S52, worked fine.

[Farbin Kaiber]

OH, just an s52 swap? In that case, search the 24v Swap thread, it's been covered many times.

[Thing30]

I used a treehouse racing booster. Moved it about an inch and a quarter to the right. Its a tight fit and your going to also shave the intake a bit where it makes contact, but It can work. Ill take close ups tomorrow

*Don't mind the ruler holding it in place*

[Fede/bmx1]

Thanks for all the replies. Definitely helpful.

[E30RedtopSR]

A 2002ti booster is the same diameter as the treehouse one.
Give er a shot.
Oh and the master cylinder has to be a 528e 82-85 model. it has the shorter pushrod depth. and you also go to 23mm bore with it.