rear wheel bearing stuck

[mr.vang]

i'm about to tackle the rear wheel bearing so i need a wheel bearing tool kit. will this kit work for the rear since it mention front bearing.

http://www.harborfreight.com/fwd-fro...ers-66829.html

[flash 23]

cant open your link from my phone. but look around for the 25% coupon.

[jink0619]

Worst job ever!!!! in my opinion...GL

[drumad]

that's the kit I used

[nrubenstein]

Worst job ever!!!! in my opinion...GL

Super easy with the BMW-B90 tool.

[Wishno87]

That is the kit I used and it was really easy.

[mr.vang]

thanks guys. heading out to HF

[wildstoats]

I just pulled my wheel bearings last night. In addition to that kit that was already linked I also picked up one of these:

http://www.harborfreight.com/automot...ator-3979.html

Makes getting the hub off really easy. Although you could also go to town on it with a hammer, dealers choice.

[S13_E30]

I just used a 36mm socket, piece of wood, Hardwood Flooring mallet, and a bit of elbow grease. I heated up the trailing arm a bit where the wheel bearing goes added just a little bit of sparkplug anti seize compound on the wheel bearing. a couple taps and it was in.

[jeffmn8]

Another thing to make it a little easier.. Stick the bearing in the freezer for 30 min then press it in.

[MR 325]

I like to use the right tool. ;)

[mr.vang]

thanks guys, hopefully everything goes well this weekend.

[mr.vang]

no luck with wheel bearing. i end up with something like this. i was thinking about getting a new arm with bearing from PNP.

[Adrian_Visser]

Those fuckers can be real cocksuckers. I ended up getting a tool made at a machine shop for about $50 that pushes on the outer race. It uses 3/4" ready rod some nuts, some machined plates and a hollow spacer to draw the bearing into. My bearing was so cockstuck in there I was leaning my full weight on the wrench to turn those nuts. You should have heard the bang when it finally broke loose.

[mr.vang]

^thats what i did but i used spacer to try to pull that fucker out. they all end up with a beating. maybe i need some stronger materiel.