Trailing arm sway link Reinforcement?

[rs4pro3]

Do any other compaines besides Turner sell the weld on plates to reinforce where the rear sway bar link mounts to the trailing arm? I've got some new special links going in, and would like to reinforce the lower mount.

[Jordan]

Really Ely. Make your own. Took me a wooping 5 minutes to make 1/8th in plates and weld them to my arms.

Make a cardboard stencil, transfer to metal.

As a tip.. don't drill the hole until after you've welded it, that way you drill it perfect :)

[rs4pro3]

I may do that, I don't have any steel around or else I probally would.

[AdamF 88iS]

I took a piece of box tubing, cut it diagonally so i ended up with 2 triangular pieces, and welded them on. Cost about a buck.

[Beej '86 325es]

for reference:

[Jordan]

HAHAHA.

Brandon you welded them on wrong.

[Beej '86 325es]

Sorry, I didn't see the word Turner. Mine are the ones that came with the ST sway bars. They must be different.

[Stu]

We mounted mine 90* of the way Beej's are, triangulated. Jordan, post pics of yours.

[Jordan]

Mine aren't much different looking then Beej's. Just better welds. Mine are also wider, so they go left to right on the arm further.