Brake pedal is soft
Collapse
X
-
Wipe all the lines clean, put some brake fluid in the master and watch for wetness as a buddy pumps the petal. Be safe, jack stand and chocks. -
im having the same problem but i left my brake system dry for like a year and until recently i drove the car rebuilt the calipers. i bled them twice but the first time my pedal was soft and it would go down to the floor to completely stop the car. after anotheer rebleed the pedal is soft even when the car is off
should i keep bleeding?
Leave a comment:
-
-
I would say you've got either a pin hole leak or the proportioning valve underneath the booster is leaking.
Do you have any braking issues other than the soft pedal?
TaylorLeave a comment:
-
I am still learning this vehicle and working on vehicles in general, but if it was a leak from either the brake booster or master cylinder wouldn't the leak be directly underneath it. I've noticed the leak further down in the picture posted above. It's more directly beneath the drivers seat.Leave a comment:
-
You sure it's not coming from the bottom of the booster? There is a seal around the MC input shaft, my bet is on that.Leave a comment:
-
And I now I'm assuming its not the cylinder or brake booster bc I don't see any fluid on our around it and the leak isn't directly underneath that area.Leave a comment:
-
hello once again everyone, i am still having issues with my brake pedal. but i believe i may have found the problem. So i bled my brakes and everything was good, i drove around and had no issues. I let the car sit for a few hours and when i returned i found a puddle of brake fluid underneath the driver side. i dont know where the source is but i have some pictures and im hoping someone could help me out.
It is a foam piece of material that i noticed was saturated in brake fluid. any ideas of the location of a leak?
thank you.Leave a comment:
-
-
If you pump the brakes with the car running, does the pedal firm up? Could very well be the master cylinder.Leave a comment:
-

Leave a comment: