no fluid from bleeder valve

[rammstein]

Umm... I thought to do that I push the brakes to force fluid into it, no?

[StereoInstaller1]

Did you fill the caliper with fluid?

[rammstein]

How? I never even drove it. I tried compressed air into to bleeder screw to remove debris. No luck. Now what?

[Mr. Tasty]

clogged between piston and where the breather valve is threaded?

[rammstein]

Done. Removed hose from caliper to line and it had fluid. Shot compressed air through it and its free and clear. Now if I push the brake fluid comes out the line. How can this be? Omg this car is no fun anymore

[StereoInstaller1]

Pull the line and see if there is fluid in the line?

[rammstein]

About two months ago I started fixing up things on the cart and nothing has been going well. I barely have time for this anymore. About ready to throw in the towel but maybe the good men here have sage advice.

My left rear caliper was seized and rather than figure that out I replaced it with a rebuild from Turner. I put it on about 1.5 months ago. I have had the car up fixing other things since then. Today I got around to flushing the fluid. I discovered that no fluid comes out, even with bleeder removed completely. Tried pressure bleeder and tried pumping. No luck. Other brakes bleed fine. What do I do besides sell car?