294MM brakes fit under 17" wheel?

[M-technik-3]

E36 offset so the spokes should not be in the way. The rotors are 19 mm thick which seem small for an aftermaket set up.

[Jb325is]

I run 294x19 rotors on the rear of my car with 17's

[M-technik-3]

Ok was looking at a front set up but seems the rotors are rather thin for the size. It's off a E46 330 Brembo setup that I had planned to use on an E36 strut.

[M-technik-3]

Never mind no point in spending this amount of money when simple effective E36 M3 front brakes will work.

[jalopi]

just a FYI, stock for stock the m3 produces roughly only 7% more braking torque than the 330i

*using the same master cylinder, pad compound, pedal ratio and booster size/power

[M-technik-3]

http://www.tcklineracing.com/webdocs/Items/Details1164.cfm

These are listed at other sites for 1700 plus and was considering them. No need it would be over kill for my street/de car

[jalopi]

i think that's a rear kit though

i had unboosted 330i brakes on my v8 car (all four corners) and holy shit they were strong, can't imagine what it'd be like with a booster

[M-technik-3]

lol missed that rear comment.

[ryan_george]

I was able to fit 302x28 mm in the front and 312x20 mm in the rear under my 16" wheels.

There should be no problem fitting a 294 mm rotor with a 17" wheel.