Brake line kit? (Hard lines)

[goskidmark]

I have searched quite a bit for new hard lines for when I drop my sub-frame, but no avail. Does anyone sell these, or do I have to cut and crimp new ones? I bought the stainless replacement hoses, but I will be replacing everything when that sub-frame is out while replacing the bushings and cleaning out the gas tank.

[Todd Black 88]

BMW.

Or buy equivalent length per made unbent lines, and bend them.

[goskidmark]

BMW.

Or buy equivalent length per made unbent lines, and bend them.

Thanks Todd! I found them.

http://realoem.com/bmw/enUS/showparts?id=1423-USA-07-1989-E30-BMW-325i&diagId=34_0153

I always forget to check RealOEM. Always.

[rcsoundn1]

I made my own since it seemed BMW sold non bent cut to length ones

[goskidmark]

I made my own since it seemed BMW sold in bent cut to length ones

What? So you don't want perfect fitting brake lines? I don't understand your statement.

[Todd Black 88]

He means un bent, cut to length.

The come straight now and you need to bend them to fit. Not hard, just time consuming.

[goskidmark]

He means un bent, cut to length.

The come straight now and you need to bend them to fit. Not hard, just time consuming.

I had no clue. I might as well just bend and make them myself.

[rcsoundn1]

correct, I got a perfect length from napa. The lines were much more softer than the stock, but a lot cheaper.