RX7 brakes question

[Streichholzschächtelchen]

Any idea on where to get line adapters? I just bought the brackets at CA Tuned.

[Streichholzschächtelchen]

Ayyy http://e30performance.info/viewtopic.php?t=1365

And within that link next to the knowledge,

http://www.parcelparts.com/metric-brass-brake-line-adapters-inverted-flare-pkg-5/

Ayyyyyyyyyy I'm juiced. Ordering now.

Ok, so I ordered the last set actually, but atleast we know the sizes for the adapter ends. I told them to restock and lmk when they do.

[E30_Narek]

Any idea on where to get line adapters? I just bought the brackets at CA Tuned.

I got them when I got the calipers so I have no idea. Looks like you got the sizes tho :D

[badwella]

This is the adapter I used. You need to go from a female bubble flare to a male inverted flare.

[Bimmerguy91]

From what I've seen the adapter should be M10 Male Inverted Flare to M10 Female Bubble Flare. I think these will work. https://www.amazon.com/Metric-Bubble.../dp/B006HI5Y1Y

[potatomash]

lol yeah rx7 brakes suck for clearance. 30mm spacers to clear my volk 17x8's by a credit cards width :nice:

[Bimmerguy91]

lol yeah rx7 brakes suck for clearance. 30mm spacers to clear my volk 17x8's by a credit cards width :nice:

What was the original offset?

[potatomash]

What was the original offset?

Ah fronts are like 38 or 36 can't remember. But flat face spoke design on dished wheel is always gonna have horrible brake clearance anyway.

I also have a set of 15x7 +15 p1 rep things which clear the brakes with no spacers by miles

[Bimmerguy91]

Hopefully my 16x7.5 +20 ESM 002s fit over these brakes

[efficient]

When you guys say machine 1mm off from the center bore do you guys mean go to town with a drill?

[Bimmerguy91]

When you guys say machine 1mm off from the center bore do you guys mean go to town with a drill?

No, take it to a machine shop and have them properly bore out the hub on the brake rotor 1 mm.