Originally posted by Mot
View Post
Announcement
Collapse
No announcement yet.
Upgrading 318i brakes
Collapse
X
-
Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205
OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827
-
Originally posted by Jean View PostCool, I plan to finally swap the rear in a few weeks :) Hopefully brake lines will fit... that's my main concern..
You must have the piping that mounts to rear tariling arm and the "secondary hose" from trailing arm to caliper.Current:
BMW 320i 2d 2.0 m20 -88
BMW 325i Cabriolet 2.5 m50 -88
BMW 316i touring 1.6 m40 -90
BMW 320i 4d 2,2 m54 -01
Comment
-
Originally posted by Rocla View Post
Hardlines from MC to rear will fit, as does the "first" hose from body to triling arm.
You must have the piping that mounts to rear tariling arm and the "secondary hose" from trailing arm to caliper.
Thanks !Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205
OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827
Comment
-
Originally posted by Jean View PostHardlines under the car don't need to be swapped correct ? I just need to lines from the "T" split at the rear subframe to the trailing arms and from the trailing arms to the calipers correct ?
Thanks !Current:
BMW 320i 2d 2.0 m20 -88
BMW 325i Cabriolet 2.5 m50 -88
BMW 316i touring 1.6 m40 -90
BMW 320i 4d 2,2 m54 -01
Comment
Comment