shocks, springs, bushings and ?? suspesion overhaul.

[dasvolk]

I'm doing the same thing - my car also makes the grinding sound and I'd be interested in knowing what that is.

Also, are the Meyle heavy duty rear shock mounts that bavauto sells good ones?

[LivingLegend06]

My front suspension feels fine going over bumps. when i start moving with the wheels having changed direction while totally stopped i can feel something in the suspension move on me (dont know if its front or rear, could be both). At higher speeds the steering response is a fraction of what it is at 30mph. i also have a creaking sound coming from the rear when i turn sharp right, at first i thought it was my differential, but then it should happen both ways.

Now that ive realized that the ball joints cannot be replaced with out doing the whole control arm, that must mean that somebody somewhere along the line replaced mine at some point (I hope), but then again the previous owner did secure the center console by NAILING IT INTO THE SHEETMETAL, so who knows how long its been.

[MikesJo]

I havn't done my control arms yet but they arn't the original in there. My tie rods are rusted so I want those changed out. What does the front suspension feel like when going over bumps?

[LivingLegend06]

trying to figure out my suspension is confusing me, when someone tells me subframe bushings i dont know what specific peices are included in that and i see a ton of different things. it looks like your right and i do need control arms, as far as i can tell its gonna be a good bit over a grand for me to do this, now i need to rethink things...

[MikesJo]

The control arms have rubber parts in them, the ball joints. E30 M3 CAB, $90ish, I think powerflex has some that are cheaper. Subframe bushings, depending on what you get, OEM or aftermarket, $40-90 I believe. Rear shock mounts, again, $30-$100.

These are in USD prices too, I had to pay the CDN equivalent :(. LoL. What I've spent on upgrades and repairs in the last year probably could've bought me another E30 in the states.

[LivingLegend06]

I was under the impression that bushings were pretty cheap. and i know i can do bilstein + H&Rs togther for 600.

Assuming my tie rods are and control arms are not bent, why would they need to be replaced? I thought that a solid peice of metal is going to be ok as long as its not gonna snap on me and its the same shape that it was coming from the factory.

I would feel ridicluous if i spend more on this car in one order than i paid for it all togther.

[MikesJo]

$700 is basically your shocks and springs, brand new. Get Bilstein sport shocks as these are matched to your sport springs. E30 M3 control arm bushings are a good substitute to stock as they are solid and offset. You may want to change your tie rods and control arms with new lemfoerder ones. Tie rods are about $80-90, and the control arms $250?

Subframe bushings, most people go OEM or urethane, both are fine. I'd also suggest new rear shock mounts with reinforcement plates.

[LivingLegend06]

Right now I have about 220k on my 1987 325is and I think its about time that I replaced the origional shocks, springs, bushings, shocks mounts and other addition stuff that should be replaced. the thing is i'm not sure what that other stuff is and i would like to put togther an order soon so that i can get going on my new parts.

I hear that oem subframe bushings will be fine, but i should get urethane CABs, but im not even sure what those are. My knowledge of the subframe bushings it about none and i need to know the names of the different bushings that i should replace at this time. i assume that my shock mounts are probabally going to be a little worn and i would like to replace as much rubber as i can in the suspension so that i can hopefull have a little more road feel and control.

The springs im going to use are H & R sports (unless someone has a good reason for me to use something else) and the shocks will be bilstens, but im not sure on the differences between sports and HDs (which one is going to be work best with the H&Rs?)

What I really need to know is what is a good site to order from and what should I do about the subframe bushings, as in what exactly should I order. I plan at getting a bently manual at the same time so that i will not go into the install clueless. The order is going to need to include everything that I will not be able to get locally at a parts store because my car is my daily and id hate to tear things apart and then have to just wait until the parts show up.

what do you guys think, im trying to keep the whole order around $700 if thats reasonable