318 Rear Disc Conversion

[Brinkley]

Hey all sorry for noob question
Going to do a rear disc conversion for my 85 318i, will 86 325 trailing arms work with my axles?
I assume I need for swap
Trailing arms
Calipers
brake lines
rotors
Ebrake cables
Would be nice:
brake master
front calipers
Is all this stuff going to bolt up or am I going to run into all kinds of stuff being different ( axles not working, etc )
Thx all

[mode]

Everything will work just fine.

[mattdk318i]

if you need any parts for that ive got tons, Im located in Columbia so im sort of close.

[Hick]

ebrake cables are the same [going by part numbers]

Im going to be doing this very soon, ill let you know if i run into any problems.

[Brinkley]

thx guys. Sure man i'll let you know. I did this on a crx once and it didnt go well so I wanted to get answers first instead of just winging it. :)

[Brinkley]

got to work on this today have the car up in the air and engine out finally, man the arms i got to do this with are rusty and dirty time to get to cleaning. the rear disc cable doesn't seem like it's supposed to come out but ill give it a shot!

[Hick]

ebrake cables are not the same but you can just leave out the ebrakes on the rear disc set up as they are just inside the hat