Announcement

Collapse
No announcement yet.

Symptoms of a bad brake booster...or is it the master cylinder?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Symptoms of a bad brake booster...or is it the master cylinder?

    So my brakes have been bad for awhile now and it's finally time to fix them. The symptoms are that when I brake the pedal feels decent but goes to the floor.

    If I pump them sometimes they're better but the pedal always goes to the floor. I've bled them on two different occasions and that didn't fix it so I believe it's the master cylinder.

    My dad thinks it could be the brake booster or possibly a vacuum leak. Any help would be GREATLY appreciated!

    #2
    Sounds like a bad master cylinder to me. A failed brake booster typically results in a very hard pedal form lack of boost.
    The car makes it possible, but the driver makes it happen.
    Jim Levie, Huntsville, AL

    Comment


      #3
      Originally posted by jlevie View Post
      Sounds like a bad master cylinder to me. A failed brake booster typically results in a very hard pedal form lack of boost.
      Thanks man, I concur. I was 99% sure but another opinion is always appreciated.

      Comment


        #4
        brake

        Dan, if you need a master, ive got one just buy the repair kit

        bobby
        Last edited by Bob87; 01-08-2009, 12:14 PM. Reason: wrong spelling

        Comment


          #5
          Originally posted by Bob87 View Post
          Dan, if you need a master, ive got one just buy the repair kit

          bobby
          You've got one or are you saying I should just buy a repair kit? Where can I get a repair kit from and is it worth it to rebuild it or is it a pain in the ass?

          Comment


            #6
            Originally posted by dandingo View Post
            You've got one or are you saying I should just buy a repair kit? Where can I get a repair kit from and is it worth it to rebuild it or is it a pain in the ass?
            theyre real handy to repair, just make sure you put the seals in the right way:pimp:

            Comment


              #7
              Originally posted by kev.skyline View Post
              theyre real handy to repair, just make sure you put the seals in the right way:pimp:
              But do you have to hone out the inside??

              Comment


                #8
                brake

                Originally posted by dandingo View Post
                You've got one or are you saying I should just buy a repair kit? Where can I get a repair kit from and is it worth it to rebuild it or is it a pain in the ass?

                Yes, Autozone, it's an easy fix, you can pre bleed the master before you install it.

                Comment


                  #9
                  Awesome, thanks for the info Bob. Where would I pick up the rebuild kit?

                  Originally posted by Bob87 View Post
                  Yes, Autozone, it's an easy fix, you can pre bleed the master before you install it.

                  Comment


                    #10
                    Originally posted by jlevie View Post
                    sounds like a bad master cylinder to me. A failed brake booster typically results in a very hard pedal form lack of boost.
                    +1
                    -Matt

                    1986 BMW 325
                    sigpic

                    Comment

                    Working...
                    X