Massive BBK Wheel Fitment Guide

[cheades]

I will try to get pictures sometime, but TRM 15x8 requires filing the ends of the caliper down (like the Kosei's) and the fronts need an 8mm spacer for the spokes to clear. The rears do not need a spacer, this is for the Race kit.

[mdv]

Installed the street kit this weekend.
Fits Kosei K1's 15X7 et27 no problem.
Also fits Borbet Type H 15X7 et 45 without issues.

[Massive Lee]

That's what I thought about the TRM. I guess they are good wheels, and affordable, but not really designed toward BBKs like some other track wheels are.

[SkinnyVT]

Just did a very quick check with the TRM 15x8's over the Massive Sport kit. They would require significant grinding of the corner of the caliper for them to clear the barrel. Didn't get it seated on the hub to check spoke clearance.

[maniacmatt]

Ya thats with the spacer, the picture is sort of an allusion though. There is more room than it appears in that picture.

[JRKOUPE]

Late but as promised pictures of street kit fitment with Ronal LS 15x7.5 et25 I am running one of Lee's 3mm spacers also for tire to strut clearance.

thnx for the pics!!!!!....

.is the spacer on in the pic where the tire appearsrightnexttothestrtube?...maybe you should go w/ a 5mm for deflection under hard track use.

[maniacmatt]

Late but as promised pictures of street kit fitment with Ronal LS 15x7.5 et25 I am running one of Lee's 3mm spacers also for tire to strut clearance.

[SkinnyVT]

Any idea if the Big Brake Kit will fit the following? This is the 4 lug setup 16"

print out the template and check. http://www.massivebrakes.com/kits/e3...300/21/318-325

btw, there are 3 different kits.

[SkinnyVT]

Hey Jeff
There's no problem with shaving a few mm off the tips of the calipers, where they are cose to the rim. These are totally non-structural areas.
Lee

I ground them down a little bit more after I took this picture. There is about a 1" section of the barrel right by the spokes that is a smaller diameter, I think with the spacers it will push the wheel out just enough to where the caliper will clear that section

[stormspike]

Will they fit?

Any idea if the Big Brake Kit will fit the following? This is the 4 lug setup 16"

[Massive Lee]

Hey Jeff

There's no problem with shaving a few mm off the tips of the calipers, where they are cose to the rim. These are totally non-structural areas.

Lee

[SkinnyVT]

Sport kit fits with Team Dynamics 1.2's. Tons of room behind the spokes but it is close around the barrel of the wheel.

[maniacmatt]

I was reported from Matthew in Canada that the 280mm kit fits Ronal's ACT LC wheels very well. Another win for the Street kit... Don't be fooled by its name, it's also a track kit with the appropriate B compound pads.

This is correct. This kit is awesome. Pics to follow tonight.

[Massive Lee]

I was reported from Matthew in Canada that the 280mm kit fits Ronal's ACT LC wheels very well. Another win for the Street kit... Don't be fooled by its name, it's also a track kit with the appropriate B compound pads.

[Emre]

Here are some pics. Outlaw 400 calipers with 11.75" diameter 0.81" thick rotors. Wheels are TDR Pro Race 1.2 in 15x7" ET25 no spacers.





Very tight fit.