Massive BBK Wheel Fitment Guide

[Massive Lee]

Hey Lee - wants the timeframe to offer the E30 sport and race kits with AP calipers?
Thanks!

I will produce the front race kit with 300x32mm discs and AP calipers by September. Hats and drive-pins remain the same as before. Only caliper mounts are different. But just to give you an idea of price, AP calipers alone are $1000.00 per pair ;-) There will be an advantage for Europeans though as the CP8350 calipers are cheaper over there, and more easily available than Wilwood products which end up costing the same as an AP part.

[uberm3]

Hey Lee - wants the timeframe to offer the E30 sport and race kits with AP calipers?
Thanks!

[amazo]

I just realized that, sorry for your trouble

[Massive Lee]

I work at a auto parts. So I found out which vehicle the BBK consist of and I ordered the parts

Then you are definitely in the wrong thread.

[amazo]

I work at a auto parts. So I found out which vehicle the BBK consist of and I ordered the parts

[Massive Lee]

I don't understand why you mention the RX7 caliper.

[amazo]

I just printed the template and put the RX-7 caliper where the caliper on the paper is. I noticed that the RX-7 caliper is bigger then on the paper. Is that ok or do I need to download the bigger template?

[E30_Pare]

It this a dream? Omg ap racing calipers. Massive kit is def on my wish list meow

[Massive Lee]

Check the fitment template against the wheel

http://massivebrakes.com/profiles/Profile_e30_Front_280x22.pdf

Also, Massive no longer sells any Wilwood component. All kits using Wilwood calipers and rotors will be sold as installation kits until inventory dries out. Buyers will get the Wilwood calipers and discs from their usual source. All Massive kits will use AP Racing calipers.

http://www.facebook.com/media/set/?set=a.263400577102075.53060.178417442267056&type=1

[amazo]

I am noob at BBK (plus I am new to BBK) I am going to be installing my BBK and will need new rims and tires. I was hoping that 15 x 8 +25 would be able to fit 280mm kit. Here is a link to the rim I was looking at.

http://passwordjdm.com/Stance-Mindset-Wheels-Silver-Polished-Lip-15x8-4x100-25-P7345C2104.aspx

[dude8383]

Does the 280x22 kit fit a set of Hartge Type A's?

[hwy84]

TRM 15x8 (again)

I just printed off the fitment template for the 300x22mm Sport Kit, and fit it up against my new TRM 15x8s.

Looks like if I run about a 3mm spacer, the only thing that hits is the head of the guide bolt/retaining pin that holds the pads in. And it looks REALLY close. That's about all the spacer I think I can run, without rubbing on the outer fender. I might be able to fit up to 10mm, if I run a ton of negative camber all the time (which isn't so bad).

Has anyone else run into this? Is there a bolt with a thinner head that solves the problem?

Also, this template only shows one plane of fitment - I have read that the caliper is too long to fit under these wheels as well, and needs grinding - is that indeed the case?

[Brian D]

Another wheel that fits: Kosei K4R 16x7.5 with a 15mm spacer. Clears the strut with about 6mm to spare, tons of brake clearance. I would check the 15x8 K4R, but they are backordered through June.

Pics are here: https://picasaweb.google.com/1059796...eat=directlink

[cbouchez]

Very nice^ I'll be running Alpina Kopis 17" Et 35 with a 25mm spacer, should be able to clear.

[bimmerteck]

16x8 e38 style 5s fit all 3 of Lee's kits with 18mm 4x100->5x120 adaptors. :)