Massive BBK Wheel Fitment Guide

[Gertech]

Has anyone fit Lee's 332x32mm "Monster" kit under Apex Arc-8s? I printed the template and when holding it up to the wheel just barely makes contact with the spoke. Maybe a very thin spacer would work? Thanks guys.

[burkey001]

SL6R 300x32mm front kit DOES NOT clear an OEM BMW Style 42 - 17x8 IS47 with a 20mm spacer.

It almost clears, only 2-3mm in it. I will be machining the inside face of the spokes so it does fit. You could choose to run a thicker spacer

[burkey001]

SL6R 300x32mm front kit clears a BBS RC304 (17x8 ET38) with a 8830 labs 20mm thick "4 to 5" lug adapter.

[burkey001]

BBS confirm that LM198 will fit over 300x32 SL6R race kit with a 20mm spacer

LM198 is 17x7.5 ET40. So at a final ET of 20 you're set. I'm going to have to get some now...

[Massive Lee]

Id like to see a pic of the AP setup OR Can one get AP calipers on the 300x22 kit?

300x32mm kit with CP8350. A CP8250 can be used and is much cheaper. http://www.facebook.com/media/set/?s...2267056&type=1 The kit is not available in 300x22mm as there's no caliper State side, even though it exists in Europe

[bmwguy325is]

Id like to see a pic of the AP setup OR Can one get AP calipers on the 300x22 kit?

[Massive Lee]

$35.00cad a pair + $20.00cad 4-day shipping. Easy. Paypal is massivebrakesgmail.com

[sharky]

There you go, that's what I need. Hook me up Lee.

[Massive Lee]

Has anyone had a issue with the 280x22 street kit with the rotors shaking inbetween Hun and wheel? With everything on and tight I can reach through wheel and literally jiggle the rotor.

It probably is because you do not have the 1.5mm spacer. Your wheel is not seating properly as the VW hat portion is 1mm thinner than a BMW hat. That 1.5mm spacer is specific to this conversion, wether you use a Dynapro or an RX7 caliper. The spacer has a 66mm center bore.

[sharky]

Has anyone had a issue with the 280x22 street kit with the rotors shaking inbetween Hun and wheel? With everything on and tight I can reach through wheel and literally jiggle the rotor.

[Massive Lee]

Thanks Greg for the picture. That's the Wilwood-based Race kit with Superlite caliper and 11.75"x1.25" (300x32mm) rotors. This latest production of the kit moves the rotor 2mm more outward than in the previous years to comply even to non-OEM steering rods (they are bigger than original Lemforder). Wheels are 15"x8" Kosei K4R. No grinding. No cutting. This kit is also available with AP Racing CP8350 and CP8250 calipers. But co$tlier.

[rneedham1979]

16x8 e38 style 5s fit all 3 of Lee's kits with 18mm 4x100->5x120 adaptors. :)

I've wanted to run style 5's for ever. Was under the impression i wasn't able too... Thanks for the post.

[lbreevesii]

Someone wanted a pic of the 300x22 setup under apex ARC-8's. Enjoy!

[Massive Lee]

Say jiizzzzz...

Adapters for the e30 300x32 kit w/ AP Racing caliper

[Massive Lee]

hmmm
no 21mm thick rears?
or 32mm thick fronts?

I never produced a rear 300x21mm kit, except for the 2002s

The brackets for the front 300x21mm kit can be used on the front 300x32mm kit. While I have them in stock.

The front 300x21mm kit can fit either a Wilwood Superlite or lug mounted AP Racing CP8250 as it is a drop-in. Kit is more expensive though.