Announcement

Collapse
No announcement yet.

strut tower problem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    strut tower problem

    i am missing a bolt on the strut tower it seems the PO sold it to me this way i didn't really notice it tell after the sell it seems that it has been broken off were theirs supposed to be a bolt what could have caused this problem.will i have to buy a new strut tower?
    84 ETA

    #2
    no, just a upper strut mount. Or you can pop that broken stud out and use a bolt. Its a PITA but its a good temp fix
    sigpic

    Comment


      #3
      Edit: /\/\ beat me to the punch

      If it's what I'm thinking you need a strut mount, or you can punch out the stud and replace it with a bolt and nut.
      I'm Not Right in the Head | Random Rants and other Nonsense1st Order Logic Failure: Association fallacy, this type of fallacy can be expressed as (∃xS : φ(x)) → (∀xS : φ(x)), meaning "if there exists any x in the set S so that a property φ is true for x, then for all x in S the property φ must be true".

      Comment


        #4
        Are you talking about on the top of the strut?

        Comment


          #5
          yeah its the upper strut mount sorry guys so could i pass AUTO X inpection would it be safe to drive ??
          84 ETA

          Comment


            #6
            yes, but its a pain to tighten the bolt. Just put it on Jack stands or a lift. Be careful though.
            sigpic

            Comment

            Working...
            X