ground control with koni full adj.....good or bad

[bimmerking1357]

im ignorant

[bmw325csi]

Some new bushes, sways, cabs, rsm and it sounds good to me

[87e30]

I like my GCs and Koni's.

[etxxz]

everything starts with the intended use and goal. are you racing? street? hybrid? do you just want to lower the car? what spring rates, why do you need koni's vs bilstein vs stock boge? addt/synergetic suspension components like control arm/sway/strut bushings, mounts etc etc etc. your thread sucks. you're asking us what's 3 and 3. we can tell you 0, 1 6 and 9.

how can we help you

[DRTSRFR]

What's up there Mr. S...;)

You have a PM...

[bimmerking1357]

k jeesh sorry my thread sucks....im building my car so that i can use it as a daily driver but every once and a while take it to a track day so i was just wondering in the GC springs with the fully adj. koni would be fine for that or if i should just go to bilsteins.......oh yeah and by the way mr. etxxz, japanese cars SUCK!

[z31maniac]

Yup, that's what I run on my car.

Call GC and talk to Jay and he'll get you setup with the right spring rate for what you are wanting to do.

[bimmerking1357]

alright thanx man....like i said im just getting into the bimmer world so im still pretty dumb

[etxxz]

k jeesh sorry my thread sucks....im building my car so that i can use it as a daily driver but every once and a while take it to a track day so i was just wondering in the GC springs with the fully adj. koni would be fine for that or if i should just go to bilsteins.......oh yeah and by the way mr. etxxz, japanese cars SUCK!

ignorant people tend to be very happy. do you really wanna get into that argument with me?

billies..even stock.. would suit your lower spring rates fine ~ round 200f and 300lb/in rear to keep it conforable enough on the street. i'd get atleast a front sway bar if you wanna keep your front tires off the fenders at the track depending on what tires you run.

[DRTSRFR]

k jeesh sorry my thread sucks.

Don't take it personal, it's R3V. You will get a handful of different opinions.
As you spend time here you will figure out who to listen to and who to ignore.

PS: You will need an approved rollbar to hit the track in a Cab.

[bimmerking1357]

yeah ive been looking around for a roll bar....and i wasnt taking it seriously i was just havin fun. and yeah i can already tell that theres some people on here that shouldnt be.

[DRTSRFR]

CHECK IT...http://www.e30tech.com/forum/showthread.php?t=47449

[bimmerking1357]

just checked it out and basically i am now saving money to build that