Steering rack swap: tie rod question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • HeyyJO
    Noobie
    • Apr 2024
    • 8

    #1

    Steering rack swap: tie rod question

    So I ended up buying an AAE steering rack from Bimmerworld that comes with e46 inner tie rods pre-installed so I bought e36 outer tie rods to use so I didn't have to mess with the inners. But I ran into a problem: neither the e36 outers or the e46 inners came with the nut and collar for locking down the outer tie rods after adjustment. Has anyone else run into this issue or know how to make this setup work?
  • FredK
    R3V OG
    • Oct 2003
    • 14764

    #2
    You need 2 clamp rings and 2 jam nuts, both of which Bimmerworld sells.

    Clamp ring part number 32111136179
    Hex nut part number 32111136494

    Comment

    • HeyyJO
      Noobie
      • Apr 2024
      • 8

      #3
      Holy crap! Thank you! I searched FCP, ECS and bimmerworld trying to find these but I didn't have the right part name or number. I started thinking maybe the only sell them on complete (inner & outer) tie rods.

      Comment

      Working...