Spherical End Links

[dude8383]

The nut on my spherical end link is completely frozen and I've stripped the nut :( Do you guys know where can I get new pieces? Tried searching here but couldn't find any sites. I'm in the middle of searching the vendors but doesn't seem they sell them alone. I contacted Patrick @ BMA to see if he could possibly hook something up.


*EDIT*

http://www.pegasusautoracing.com/group.asp?GroupID=RODEND

Found em but have no idea what sizes and I'm not next to my car right now. Does anyone have measurements by any chance?

[dude8383]

bumping this because i have no idea what the sizes should be.

[AlarmedBread]

What kind of end links do you have? Most for sways are 3/8, but some people use metric too.

I use ones from here, same as on the gokarts. You do need to get high misalignment spacers though.

http://www.boomerangracing.com/Tie%20Rods%20&%20Rod%20Ends.htm

[dude8383]

What kind of end links do you have? Most for sways are 3/8, but some people use metric too.

I use ones from here, same as on the gokarts. You do need to get high misalignment spacers though.

http://www.boomerangracing.com/Tie%2...Rod%20Ends.htm

I'm not really sure to be honest. They are the kind that IE includes with their kit. I'll take pictures of the end link in a few.

Thanks for the link, pretty darn nice pricing there!

[dude8383]

finally took a picture of my broken end link :(

[AlarmedBread]

Looks like a male stud style endlink, but the top one is a regular female bolt through one with spacers. If you can figure out the thread (take to a hardware store and check it) You can just get a replacement male endlink and spacers or a stud style from many sources.

[dude8383]

Looks like a male stud style endlink, but the top one is a regular female bolt through one with spacers. If you can figure out the thread (take to a hardware store and check it) You can just get a replacement male endlink and spacers or a stud style from many sources.

Hey man, thanks for helping me out :)

I contacted IE and asked them what sizes and ended up ordering male thru holes with new washers and nuts.