m3 front sway tabs???

[slow95tsi]

anyone know if someone sells the swaybar to strut mounting tabs?
im getting ready to install my suspension but im running a 21mm sway bar on my 325.

when i upgrade my swaybar i want to run the m3 style swaybar links so i was curious if anyone has ever seen the tabs sold to weld onto the strut housing. it would be much easier to buy them and weld them on while im changing struts so i do not have to pull the strut housing off when i upgrade my sway bars to fab the tabs up.

i have done pleny of searching and cant find it anywhere.

thanks in advance guys

[E30Idea]

I just bought mine from akg last week. $35.98 shipped to my door. Hells ssturdy and the metal welds up nicley.

[browntown]

I got mine from ground control. Not online, but if you call them they'll know exactly what you're talking about.

[NC325iC]

does anyone have a template or measurements where to put them on the strut?

[E30Idea]

does anyone have a template or measurements where to put them on the strut?

Get the car level on the ground or on a lift works best. Mount the endlink to the bar on both sides. Than mount the tabs to the end links. Make the bar level with the ground, mark the strut tube for the tab, thane remove the tab from the end link and weld them up.

[X_WizarD_X]

Try this for location:

http://www.e30tech.com/forum/showthread.php?t=77282

[gearheadE30]

Are you guys removing the strut tubes before welding?

[M-technik-3]

RRT sells them as well.

[NC325iC]

Are you guys removing the strut tubes before welding?

i would hope so

[StereoInstaller1]

<waits for someone to hose clamp them on>