iX Suspension setup

[Mlarsen]

I'm planning a lowering my 325ix in the near future. Was wondering what some of guys have done. I looked in the suspension lowering thread but, didn't see any iX's. Let me know what ya got!

[DRTSRFR]

Here's my buddy's on Ground Control and standard Koni inserts...

[nrubenstein]

I strongly recommend doing GCs. H&R sports just don't have enough rate for the very limited front travel.

[Mlarsen]

Here's my buddy's on Ground Control and standard Koni inserts...

I'm assuming your buddy cut the perches.

[DRTSRFR]

Nope, if you cut the perches it'll lower another 3/4 inch or so.

[Mlarsen]

that sounds like what i should do thanks

[DRTSRFR]

Just make sure your half shafts are in good condition, or they won't last long if you're running low.

[Mlarsen]

HA, just replaced em' last night! I've been slackin and now I'm trying to get ready for the e30 picnic.

[88e30ix]

HA, just replaced em' last night! I've been slackin and now I'm trying to get ready for the e30 picnic.

Sorry to bring back an old post but where would I get these GCs and part #s. Thanks.

Sorry did not look hard enough! Got my answer already!