Soft steering

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • CrazyB
    E30 Addict
    • Feb 2004
    • 420

    #1

    Soft steering

    I just did a full suspension rebuild on a 89 325i I picked up for cheap. I got new control arms and offset ca bushings billie sport struts and IE stage 3 springs. The car handles turns great almost 0 body roll my only issue is the steering is really soft. There is alsmot no feedback. It is like tittering a bus. Any suggestions how to tighten up the steering a little, should I get the tie rods replaced/
    Will i need to do aliment if I replace the tie rods?
    Also will tie rods stiffen up the steering and give it more feedback?

    AutoCross Photos!!https://picasaweb.google.com/eugenes18t
  • Luis325
    No R3VLimiter
    • Jun 2009
    • 3847

    #2
    Bump !
    Having same problem!
    sigpic
    1986 "C2 2.7 Alpina" Sedan
    1987 325ic Black Vert
    1986 327i Red Track Car RIP 10/10/10
    1989 325is Henna S50 track car SOLD


    Transaction feedback here please!!
    http://www.r3vlimited.com/board/showthread.php?t=170548

    Comment

    • jlevie
      R3V OG
      • Nov 2006
      • 13530

      #3
      To get more feedback from the steering wheel (on the cheap) remove the power steering belt. The other solution is to replace the rack with one that has a lower ration (like an E36 or Z3 rack).

      If you replace the tie rods, the front wheels will need to be aligned.
      The car makes it possible, but the driver makes it happen.
      Jim Levie, Huntsville, AL

      Comment

      • Luis325
        No R3VLimiter
        • Jun 2009
        • 3847

        #4
        that coulb be my problem... I replaced them but the car has not been alligned....
        Going to start there and see what happens..
        sigpic
        1986 "C2 2.7 Alpina" Sedan
        1987 325ic Black Vert
        1986 327i Red Track Car RIP 10/10/10
        1989 325is Henna S50 track car SOLD


        Transaction feedback here please!!
        http://www.r3vlimited.com/board/showthread.php?t=170548

        Comment

        Working...