If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Front:
Ground Control kit welded at stock perch height. (1/4'' thread to go down)
Eibach 2.5'' / 6'' 440lbs spring.
Bilstein Sport shock with 1 of 3 internal bumpstops cut out.
Ireland Engineering Race camber plates.
Mason Adjustable strut tower bar.
H&R 22mm sway bar.
E36 M3 sway bar end-links connected to housings instead of control arms.
E30 M3 CABs.
Rear:
Eibach 2.25'' / 6'' 700lbs rear spring. (All the way down)
Bilstein Sport shock.
Adjustable tower bar.
Stock sway bar.
Wheel:
e38 Style 5's (Fill 'n drill to 4x100)
16x8 et23
205/45-16
Billy sports
Ground Control coilovers 375/450
AKG RSM's, subframe bushings, diff bushing, trailing arm bushings, CAB's
E36 rack
NEW OEM control arms, and sway bar links and bushings front and rear
Billy sports
Ground Control coilovers 375/450
AKG RSM's, subframe bushings, diff bushing, trailing arm bushings, CAB's
E36 rack
NEW OEM control arms, and sway bar links and bushings front and rear
Comment