The suspension setup/ride height thread
Collapse
X
-
-
-
-
H&R Sport Bilstein Sport 15mm drop hats stock spring pads. A/C removed, spare tire in place and over half tank of gas.
Leave a comment:
-
Front:
Ground Control kit welded at stock perch height. (1/4'' thread to go down)
Eibach 2.5'' / 6'' 440lbs spring.
Bilstein Sport shock with 1 of 3 internal bumpstops cut out.
Ireland Engineering Race camber plates.
Mason Adjustable strut tower bar.
H&R 22mm sway bar.
E36 M3 sway bar end-links connected to housings instead of control arms.
E30 M3 CABs.
Rear:
Eibach 2.25'' / 6'' 700lbs rear spring. (All the way down)
Bilstein Sport shock.
Adjustable tower bar.
Stock sway bar.
Wheel:
e38 Style 5's (Fill 'n drill to 4x100)
16x8 et23
205/45-16Last edited by ak-; 01-01-2011, 04:50 AM.Leave a comment:
-
-
Is anyone running 6 cylinder springs in a 4 cylinder e30? I'm guessing it isn't that big of a difference in the front?Leave a comment:
-
Custom Valved Koni's
GC springs 600f/700r
GC Camber Plates
GC RSM's
ST sway bars 22/19Leave a comment:
-
H&R race and Bilstein sports. E90 drops hats, no spring pads in front, OEM pads in rear.Leave a comment:
-
Bilstein Sports with GC basic coilover kit and GC street camber plates.
Wheels are 15x7, ET 25. Tires are 205.50.15Leave a comment:
-
Didn't see a picture of a touring on this drop thread so here is mine.
50/50 drop. Not sure on the specifics though
Leave a comment:
Leave a comment: