Urethane bushings options for stock sway bars?

[Nitrox]

Looking for cost effective upgrades for stock sways. So far all I can find are these from BMP:

http://www.bmpdesign.com/category-exec/category_id/56/page_num/2

Is there anything else out there?

Also, except for the Ireland part, I haven't found anything in the way of aftermarket end links. Beyond adjustability are the Ireland parts any better than a fresh set of oem's?

TIA

[DanGillan]

dont wast money on putting aftermarket endlinks on a stock bar, i just did an e30 m3 rear bar with BMP urathane bushings and new stock end links, feels good, save the aftermarket shit for the aftermarket bars (except bushings, buy those for your stock bar from BMP)

[b00b00]

Some have had success machining the sway bushings out of hockey pucks.

It may be worth your time and effort or not.

-a-

[MattE30]

Some have had success machining the sway bushings out of hockey pucks.

It may be worth your time and effort or not.

-a-

Only in Canada ;)