H&R Sport Cup Suspension Kit

[Aus E30]

Just wrote up a whole post and wasn't logged in..lost it all damnit! D:
...soooo heres the short version.

I'm looking for something to give the car a lowered stance reduce wheel gap plus any bonus handling gains (my daily driver so not a major concern) I would rather have something I can install myself without welding /fabbing ect. also no Coilovers for now, Just component swapover (if possible, as I dont know)
From the searching it seems H&R/Bilstien combo's and the like are the norm without going to crazy. I've never had any experience with suspension so this is a first for me.

My car is a 1988 320i(4door) All currently stock susp. Pics here! http://r3vlimited.com/board/showthread.php?t=170314

http://www.tirerack.com/suspension/s...3.1&perfCode=S = 2.0 front/rear Lower

or

http://www.turnermotorsport.com/html...CT_ID=E30SPORT
Doesn't specify 320i (they never do) still compatible?
= 1.25 front/rear Lower (not sure if this would be low enough, im pretty 4x4 as you can see in my pics, then again I have no idea how these things turn out once installed)

Am I on the right track? Any help/comments greatly appreciated.
With all the info online + especially here on R3v its still hard to find a modest basic upgrade/setup.
Also almost every site doesn't offer an option for "1988 *320i* sedan" So should I be looking at 323i ect? What would be the closest match?

Thanks all.

[Aus E30]

Jeez, with the price of shipping here to Aus its almost the same price for shipping as what the parts cost..D:
At about 250ish for H&R springs + 450ish for Bilstien Sports = $500 postage! :facepalm:

Any local Aussies care to share any secret?