Announcement

Collapse
No announcement yet.

Lowering the rear a bit/fixing rake

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Lowering the rear a bit/fixing rake

    I'm running on 60/40 Apex springs and I hate the rake look. I've thrown two gravel bags in the trunk to help with traction in the snow, which has made my car look 100x better.

    So I'm wondering if there's a way to lower the back end a bit without buying new springs? I originally thought drop hats but those are only for the front, so I'm kind of lost.

    #2
    Remove spring pads, just did mine yesterday.
    1985 M10b18. 70maybewhpoffury. Over engineered S50b30 murica BBQ swap in progress.

    Originally posted by DEV0 E30
    You'd chugg this butt. I know you would. Ain't gotta' lie to kick it brostantinople.

    Comment


      #3
      Removing the rear pads MIGHT get you what you want but it might not be enough to fix your problem
      Need a performance chip for you BMW? Shoot me a PM and I'll get you taken care of!!
      Taylor- Follow me on Instagram @e30_fiend


      Comment


        #4
        removing the pads wont drop it as low as you want. Think about it, removing the pads gives u about a 1/4-3/8 drop. The downfall to that is the spring will be sitting right on the arch. Which means metal to metal contact. More noise, and more RUST alot faster. Thats not fun, just go with a lower spring in the rear. Or if your really poor, cut em ha. ENJOY.

        Comment

        Working...
        X