E30 rear billy sports and IE RSM

[e30gentry]

I have a 1990 325i, just tried to install new rear billy sports with ireland engineering solid/urethane rear shock mount. There is nothing to keep the mount from sliding down the shock while under load. I installed a washer but it is such a small lip on the billys and not sure if it will damage them. has anyone encountered this before?

[jlevie]

There is supposed to be a large thick washer on each side of the mount.

[e30gentry]

There is supposed to be a large thick washer on each side of the mount.

That is what i thought. Neither the mounts out shocks came with one. But like i said i installed some just not sure if they are going to force them selves down the shaft of the shock.

[MattM]

http://www.realoem.com/bmw/showparts...27&hg=33&fg=45

number 6 and 12, I suggest you order them.

[e30gentry]

http://www.realoem.com/bmw/showparts...27&hg=33&fg=45

number 6 and 12, I suggest you order them.

Will those work with the billy sports?

[Hellabad]

http://www.realoem.com/bmw/showparts...27&hg=33&fg=45

number 6 and 12, I suggest you order them.

What he said. And they will work perfect with Bilstein. There may be other parts left off however, make sure you have 5 and especially 4.

[einstein57]

Make sure to remove the allen bolts, apply loct tite, and re assemble. They have a habit of backing out.

[Philo]

The parts you need should be on your old assemblies.