Announcement

Collapse
No announcement yet.

H&R race spring on 1989 318is

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    H&R race spring on 1989 318is

    Will I have problems with my 205/55/15 tires? wheels are 15inch racing dynamic,not sure is it 6.5 or 7 all around.

    #2
    Nope no problems. HR race isint all that low. Especially on a 318. Where did you find a 89 318 in the states though?
    Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

    Comment


      #3
      I had those on my 91 318is track car. H&R red race w/billy touring/ eibach sway bars f&r / IE rear upper shock mounts/ derling front lower bushings offset/ BMP f&r stress bars. Handled quite well and i ran Nitto NT01'S 205/50/15 no problems.
      Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

      garage queen 91 bmw 325is / 1972 Chevy El Camino 355 sbc 450hp

      Comment


        #4
        Originally posted by Wishno87 View Post
        Nope no problems. HR race isint all that low. Especially on a 318. Where did you find a 89 318 in the states though?
        beats the shit out of me,my uncle have 3 of them in good condition. one is all trick out with recaro seats,shit load of m parts from in and out,jdm projectors head lights and bbs rs 16wheels.

        other 2 is one with m30 motor swap and he let me have one.
        Last edited by immajackuup; 01-31-2011, 06:04 PM.

        Comment


          #5


          Comment


            #6
            Originally posted by QUKBMER View Post
            I had those on my 91 318is track car. H&R red race w/billy touring/ eibach sway bars f&r / IE rear upper shock mounts/ derling front lower bushings offset/ BMP f&r stress bars. Handled quite well and i ran Nitto NT01'S 205/50/15 no problems.
            but i have 55's side wall not 50's like you.

            Comment


              #7
              Originally posted by immajackuup View Post
              but i have 55's side wall not 50's like you.
              Its still all good for you to run them.;)
              Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

              garage queen 91 bmw 325is / 1972 Chevy El Camino 355 sbc 450hp

              Comment


                #8
                There is no 1989 318iS, hate to burst your bubble.

                205/55/15 would be the correct height to run to keep the OEM overall diameter.
                BimmerHeads
                Classic BMW Specialists
                Santa Clarita, CA

                www.BimmerHeads.com

                Comment


                  #9
                  Originally posted by MR 325 View Post
                  There is no 1989 318iS, hate to burst your bubble.

                  205/55/15 would be the correct height to run to keep the OEM overall diameter.
                  ic,guess my uncle was wrong about at the year and thanks for the info.:)

                  Comment


                    #10
                    Look at your title you own it now.
                    Drive it hard. Maintain it well.


                    Convertible Technical & Discussion
                    A Topless Memorandum

                    Comment


                      #11
                      Originally posted by MR 325 View Post
                      There is no 1989 318iS, hate to burst your bubble.
                      Actually there were, just not in NA. Unlikely, but could be a grey market car.

                      Comment

                      Working...
                      X