thanks!
my car is stock suspension, I've been romping over speed bumps and no contact yet.
the clearance is about as close as it can be to clear OEM headers, no modification to clear headers was needed.
if your car is very low, I'm sure the oil pan would hit before this thing as its much further back- at least for driveways is concerned. random things hitting it I have not had issues at all.
if you add the thickness of the tube (30mm) under the header and 1-1.5cm header clearance, that is all protrusion there is.
realistically, measure 45mm under your header and ponder the additional ground clearance issue. I am not a super low vip car guy - Although I think it looks very nice @ Shows :)
I will try to measure the added overall thickness to clearance the x brace adds @ each corner of it and middle next time the car is in the air-
does anyone local have a race skids unit and want to drive my car to compare?; ideally a stock suspension e30 street car with stock wheels.
how do they test? I would be game to test this thingus for fun.
how involved is the install of the mason and other brace offerings?
E36 x brace install on e30; factory style.
Collapse
X
-
Thanks for posting. I'll be going with either the Mason, Raceskids, or this route.Leave a comment:
-
Not sure beyond the usual torsional rigidity test (affix three corners of the chassis and measure force applied -> displacement on the forth corner). The raceskids piece is certainly a lot more plug-and-play.Leave a comment:
-
Looks like it hang's low. Any pictures from oil pan height to show off how it sits?
Cool idea!Leave a comment:
-
-
E36 x brace install on e30; factory style.
Has been Installed on my car for a month or so now; the difference is worth the time.
Baseline footwork prep for me is chassis strength/ structure increase on standard tires, footwork. Improve the body first!!
Done as factory as possible, oem bmw hardware and nutserts and nut sert setting rivit nut tool used.
Driving impression; much more noticeable than installing same item on e36m3 with Coilovers, this is my e30's first chassis modification from original spec.
Factory BMW OEM Parts required:
4 m8 nutserts and 4 matching 13mm bolts
2 m10 nutserts and 2 matching
16mm Bolts
1 Oem x brace for e36.
pn's:
X-Brace 51718410212
M8X20-Z1 Hex Bolt with Washer 07119915093
BMW M8 Nutsert 51718175003
M10 bolts : 33306760652
M10 nutsert: ??







One modification to angle of x brace must be made to fit e30 chassis.
The rear m10 mounting point of the brace must be adjusted about 15 degrees to match the e30 chassis curve. Simple vise +slow human push will do it.





Last edited by Wanganstyle; 07-31-2011, 07:23 PM.Tags: None

Leave a comment: