If you want to see how cars are outfitted in japan; please reference a "CUSCO" catalog- they make brace(r)-ing for the entire car, bottom to top, side to side, front to rear.
car handles neutrally (reference video) and has more grip than any other E30 with random miss matched stock size (and one snow) tires.
BMW made (OEM Factory Parts - Motorsport Division) bracing for both top and bottom of many M cars:
E36M has bottom X brace + pitch stopper for WBS M only ZF/Getrag manual transmissions
E36M also had top front strut tower brace avail from BMW motorsport.
No known (at least to me) Factory OEM E36M rear strut tower bracing (as the speakers are in the way).
with both front items installed (in usa only the 1995 LTW edition WBS M3 had the strut bar as option parts) the E36M increases its performance.
no detriment to no rear chassis stiffening. Rear top bar or front top bar does not do nearly as much as the X brace.
X brace connects the SUBFRAME with the CHASSIS; Effect = the subframe moves less forwards and backwards when you are on the throttle or brake, or turning. In subaru world they have one called "H" brace, is the same idea and function.
E39 M5 has rear subframe bracing that goes between the chassis and the subframe in the REAR, heavy duty items.
This is the install for reference; Back in 2008 I added rear bracing from a WBS M5 e39 to my E39 non-M chassis because I wanted to go faster :)
E36 x brace install on e30; factory style.
Collapse
X
-
You ALWAYS want more chassis stiffness. NEVER think that you do not. A rigid chassis will make your car ride better and with less drama (if you've ever hit a sharp bump and experienced "crash" or quick oscillation of the chassis, that is from lack of rigidity), will reduce rattling inside the cabin, and will make the car more confidence inspiring. If you are worried about understeer post modification, remember two things:
1) in the E30 chassis, more roll stiffness up front seems to INCREASE the amount of grip (likely because of poor camber gain on a lowered car).
2) there are many ways of rebalancing your handling--spring rates, sway bars, alignment, etc.Leave a comment:
-
Yes. Done this on 2x prior M3's and 2x prior subaru's STi-RA, Sti. This is done all day long :)Last edited by Wanganstyle; 08-17-2011, 11:57 PM.Leave a comment:
-
And how aboput using both, strut bar and x brace? Would be too much? Anyone that tried it?Leave a comment:
-
This modification INCREASED my front end grip a lot. Decreases understeer, the suspension is more effective and front tires utilize more EFFICIENCY% to have MORE GRIP with chassis stiffness. :)Leave a comment:
-
I like the idea of this, but i feel like it would over stiffen the front of my car. Not saying it would do the same for others though. My car already pushes at the limit, so i wouldnt want more front chassis stiffness. (at least for now)Leave a comment:
-
Got the E30 on the lift last weekend @ JRD;
checked all nut serts and inspected chassis for stress. All points undamaged, chassis seems to be holding happily post 3 months ++ some serious mountain time :)





Then I went on a short drive in the mountains :)
link:Last edited by Wanganstyle; 08-18-2011, 01:31 AM.Leave a comment:
-
in prior experience, the under body bracing does more to improve the chassis dynamics than top bracing.
I have had this experience with e30,e36, GC8 (subaru) chassis and these kind of bracing.
in my prior 3 e36M's I have played with various combinations of front brace, rear brace, and oem X brace.
E36 also has one big Bar that goes across chassis, I am planning on installing that one also on my e30 @ the end of the front chassis rails, and foam-reienforcing the rails :)Leave a comment:
-
I wonder what would be the difference between the shock strut brace and the X brace like this one. Or even two of them installed or might be to overkill?
Nice job.Leave a comment:
-
I can definitely appreciate unspottable yet solid mods like chassis strengthening or diff modification before doing anything else. I rode around with an M50/stock exhaust, stock suspension and UUC swaybars on bottlecaps for quite awhile--I wanted to retain stock ride height for shits and giggles when I first put the GCs on, but the way I pieced them together I didn't have adjustable rear ride height so that didn't fly.Leave a comment:
-
I enjoy driving the car to its chassis flex limits :)I wouldn't be surprised if you were the only person on r3v with stock suspension and any bracing beyond a strut bar. :p
Pretty much bolt-on. They attach at the subframe bolts (or possibly at the steering rack bolts, I can't remember) and at the lollipops.
I'm surprised that you are noticing a difference on stock suspension. I'd like to get one of these soon; I hate wet noodle chassis and the E30 does not really seem on the stiff side.
The car also has a 4 clutch high lock LSD, a PWR e36M radiator, rather few people would mod like this with stock suspension I know :)
I initially drove the car with HR race springs and bilsteins/konis +top hats and its great, but not a ideal setup to my style so I reverted to 100% stock to learn the e30 chassis.
I drove a 100% stock e36M for a while before diving into the S54 transplant project, helped me learn :)Last edited by Wanganstyle; 07-13-2011, 11:25 PM.Leave a comment:
-
I wouldn't be surprised if you were the only person on r3v with stock suspension and any bracing beyond a strut bar. :p
Pretty much bolt-on. They attach at the subframe bolts (or possibly at the steering rack bolts, I can't remember) and at the lollipops.how involved is the install of the mason and other brace offerings?
I'm surprised that you are noticing a difference on stock suspension. I'd like to get one of these soon; I hate wet noodle chassis and the E30 does not really seem on the stiff side.Leave a comment:
-
Brace aligned via the center hole; center hole is already in the E30 X member, just enlarge for sert with stepper bit (snap on has good ones).
I don't have the m10 sert pn's off hand, but it will be counterpart to OEM e36 chassis brace bolts (re-used from my E36M3)
most BMW parts counter guys will probably be able to look them up!
One could also source aftermarket items of similar high quality but the OEM units were only $1-$2 per nut sert; at the time it was not really worth the time to find and buy a pack of aftermarket or equal items. Somebody with higher grade fastener knowledge could perhaps chime in or consult a fastener shop?Last edited by Wanganstyle; 07-13-2011, 04:22 PM.Leave a comment:
-
How did you figure out where to line it up? Edit, I guess once your have it under the car, you can space it correctly.
Do you have the part numbers for these oem parts you used?
4 m8 nutserts and 4 matching 13mm bolts
2 m10 nutserts and 2 matching
16mm BoltsLeave a comment:

Leave a comment: