Announcement

Collapse
No announcement yet.

Front end pull/shake

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Front end pull/shake

    I just put New wheels and tiree on my car, had them balanced, and everything drove good. I didnt have any wobbles or shakes in the steering wheel. The other day i lowered the front about an inch and i then got a front end wobble. When i left for work this morning it was pulling hard to the left. After i got gas it was pulling hard to the right. Makes no sense to me. It doesnt start happening until about 40mph. I checked the bushings and balljoints and nothing seems to be ripped or loose. My only guess could be it needs an alignment or the toe set?

    #2
    Changing the ride height will affect toe. The pulling to each side sounds to me like binding strut bearings. If the strut bearings are binding the car will pull in the direction of the last hard turn.
    The car makes it possible, but the driver makes it happen.
    Jim Levie, Huntsville, AL

    Comment


      #3
      Makes perfect sense because it was pissing me off so id jerk ther wheel hard and that is the way it would pull afterwords.

      Comment


        #4
        Well the wobble is due to the nonhub centric spacers i have. Need a pair of 5mm hub centric now.

        Comment

        Working...
        X