Ground control camber plates-which ones are these?

[e30serg]

Hey guys-I bought these camber plates a while back and can't remember which model they are. They have a 14mm ID and they look to be the model used with the stock springs and upper spring plates. Am I right?

Btw, these will be for sale soon.

[Holland]

They look a lot like my spec plates sans markings.

[Balleristic31]

How much you looking to get for them?

[MR 325]

Yup, look like Spec E30 plates.

[e30serg]

If I remember correctly, I think these were the last version of the "New Design", before the ones on their website came out. I'll contact Jay and ask him to chime in.

Balleristic31-PM sent.

[Balleristic31]

If I remember correctly, I think these were the last version of the "New Design", before the ones on their website came out. I'll contact Jay and ask him to chime in.

Balleristic31-PM sent.

Didn't receive one? :/

[e30serg]

Doh! Sorry, got busy. PM sent now....

[Hellabad]

This mis Jay. I can tell those are speciailly assembled, but I can't be sure of the exact reason. If you give me your name, I can look up the notes and tell exactly why they are configured like that.

They are not "Spec e30" plates. The Spec e30 plates are Steel because the Bilsteins and HR are very hard on upper mounts, and the steel is also thinner for a lower height.

They are not the new street prepared plates, but the only difference is the fasteners on the newer style which were only changed so that you dont need two different allen wrenches.

They are something special, looks like for Bilsteins on a street car, but if you PM me your name like I said, I can figure it out.


Jay

[e30serg]

PM'd

[e30serg]

From Jay:

"They will work with stock springs with a slight modification. On the "c bracket" that holds the studs from underneath, One or two of the heads of the bolts may need to be sanded top make sure everything clears when you steer."

These are going up for sale now.