cosmo doesnt fit

[bbmcgee]

so i have an e30 318is
i removed front struts. saw that they were biltseins - and in perfect condition .removed spring and boot - repainted etc etc -i installed cosmo coilover onto strut and it hits the gold ring around the srut - top - where the actual strut meets the seal .the sleeve of the coil over rest on this part - not on spring perch car monster trucks - did i get the wrong set up in the mail... put entire m3 front end in new everthing was runnin smooth till those sleeves didnt fit please helo me out - thanks

[AndrewBird]

Got a picture?

[E30_fiend]

You have to take that big gold nut off and THEN put the threaded sleeve on.

That should solve uour problem


Taylor

[e30leigh]

yup. you need to remove the big nut that holds in the shocks. that will solve all your issues.

as already said

[bbmcgee]

thank you - i didnt thing it was removeable. i got the rear on . thank you very much.