ST Lowering Springs

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • glnr13
    E30 Fanatic
    • Oct 2011
    • 1334

    #226
    are you sure the springs are seated properly?

    I have the 318is springs too and I'm even all the way around.
    sigpic

    Comment

    • Balleristic31
      R3V Elite
      • Aug 2009
      • 4198

      #227
      These springs are hardly stiff. Nothing compared to h/r races or IE3s. They could be significanly stiffer up front imo.

      They ride super comfy though with HDs! Great dd spring

      -NICK

      Comment

      • JonnyOg
        Advanced Member
        • Sep 2012
        • 191

        #228
        Originally posted by glnr13
        are you sure the springs are seated properly?

        I have the 318is springs too and I'm even all the way around.

        Yea they are seated properly in the fronts for sure, was there anything specific I had to do for the back?
        And did you measure the drop you got?
        Last edited by JonnyOg; 09-23-2012, 10:36 PM.

        Comment

        • glnr13
          E30 Fanatic
          • Oct 2011
          • 1334

          #229
          here were my measurements after settling:
          FL 2 3/8" FR 2 1/4"
          RL 2" RR 2"

          keep in mind i'm in a lighter m10 model along with e90 drop hats.
          sigpic

          Comment

          • mr ilia
            E30 Addict
            • May 2011
            • 582

            #230
            check you RSMs, one of mine is busted, so, for now, it sits a tad lower on the left side.

            Comment

            • glnr13
              E30 Fanatic
              • Oct 2011
              • 1334

              #231
              that makes sense for his rear but his front is off by 3/8" too.

              i was thinking for the front that they didn't seat properly since the springs are shorter than stock so when you lower it down it could sit incorrectly or maybe the spring pad is off.
              sigpic

              Comment

              • BamaE30
                Wrencher
                • Sep 2008
                • 239

                #232
                Today I ordered the M3 set and the 318 1.5" drop set. When they arrive I will try to give everyone a comparison of the two. $70.00 is still a good price as of today makes me a happy guy....
                Imported from Detroit

                Comment

                • JonnyOg
                  Advanced Member
                  • Sep 2012
                  • 191

                  #233
                  Yea I put in a 14.5m rsb at the same time so that isn't it. Maybe I need new springs pads all around?

                  Comment

                  • Chriskbmx
                    E30 Modder
                    • Apr 2012
                    • 972

                    #234
                    so i just ordered a set of 318is springs and e90 drop hats. any one have an average shipping time?

                    Comment

                    • HerbReal
                      Mod Crazy
                      • Feb 2012
                      • 767

                      #235
                      Originally posted by Chriskbmx
                      so i just ordered a set of 318is springs and e90 drop hats. any one have an average shipping time?
                      Mine took about 5 days for the springs to come in and they were in the same state as me (CA). They should give you tracking number for shipping though, that's the best way to gauge it, good luck.
                      - 98 M3 Cabrio
                      Photo work: http://www.herbreal.com
                      Instagram: @herbreal
                      Twitter:the_herb_real

                      Comment

                      • einstein57
                        R3V OG
                        • Jun 2007
                        • 10780

                        #236
                        Just ordered a set. I'm a loser. lol
                        Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

                        www.gecoils.com
                        My euro 316 project Transaction Feedback

                        Comment

                        • IRON-E
                          I waste 90% of my day here and all I got was this stupid title
                          • Dec 2007
                          • 16548

                          #237
                          So which ones should I use for a 325ic?
                          @IRON-E30 aka Edwin:D

                          Comment

                          • MoreMayhem
                            Mod Crazy
                            • Feb 2012
                            • 649

                            #238
                            May have just payed for the last set. E30 M3 springs. Went back and looked at their eBay store and they were gone. Unless they list more, of course...

                            Comment

                            • -negrito-
                              Member
                              • Aug 2010
                              • 91

                              #239
                              Sorry that Im sidetracking the thread but what are good shocks for these springs?

                              Originally posted by IRON-E
                              So which ones should I use for a 325ic?
                              I ordered about 2 days ago the 318i that lowers 1.5"

                              Comment

                              • Swanny
                                R3VLimited
                                • Mar 2012
                                • 2834

                                #240
                                Bilstein sports all day long. Not sure how the hd's would hold up because they are a bit lower than advertised. There is a pretty sick deal on tokico products here http://www.tokicoperformanceshocks.com/
                                Something like 65 bucks each for the fronts. Worth a shot since you're already saving a ton on the springs
                                Swanny!
                                SUCKERS.

                                Comment

                                Working...