Steering Pulling to Direction of Last Turn

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • CircuitMonster
    replied
    Been having the same issue but my washers are in there.

    Leave a comment:


  • JGood
    replied
    It's also something to look for when going to camber plates or changing anything with the spring hat/bushing/mount setup. I fibbed a bit when I said I made the same mistake. My issue was actually an aftermarket camber plate with a poorly designed spherical bearing that required extra clearance via a spacer equal to 2-3 of the factory washers. I just simplified my description because I knew it was the same symptoms as what would happen if you leave out the washer in the factory setup.

    So, in short, always check the clearance between those parts when reassembling them, especially when aftermarket parts are involved.

    Leave a comment:


  • jbruch694
    replied
    Originally posted by jlevie
    That is a common error, the first time you do a suspension...
    Well, this project popped my suspension cherry so there we go!

    Leave a comment:


  • jlevie
    replied
    Originally posted by jbruch694
    Yes, I have new mounts on (which include new bearings). The old ones were falling apart. Thanks.

    Edit: Glad I am not the only one who has forgotten to put this washer back in!
    That is a common error, the first time you do a suspension...

    Leave a comment:


  • jbruch694
    replied
    Yes, I have new mounts on (which include new bearings). The old ones were falling apart. Thanks.

    Edit: Glad I am not the only one who has forgotten to put this washer back in!

    Leave a comment:


  • JGood
    replied
    I had the same issue, and as others said, the spring hat was rubbing on the strut mount due to the lack of the washer. I spaced it up, and the problem went away. The steering became much lighter, too.

    Leave a comment:


  • tonerrrr
    replied
    Originally posted by jlevie
    When replacing all of those suspension parts, did you also replace the upper strut bearings? If not, get them before you tear down the struts for the missing washers.
    This is a good idea, they should be $30ish each iirc, the one in my video was replaced as I ordered it initially thinking that was my problem and my steering has been awesome since!

    Leave a comment:


  • jlevie
    replied
    When replacing all of those suspension parts, did you also replace the upper strut bearings? If not, get them before you tear down the struts for the missing washers.

    Leave a comment:


  • tonerrrr
    replied
    Good luck! Have a buddy to help you! Never underestimate a second pair of eyes.

    Leave a comment:


  • jbruch694
    replied
    Thank you good sir. Now comes the challenge of fixing this in the university parking deck with 2 jack stands, a widowmaker and limited hand tools.

    Leave a comment:


  • tonerrrr
    replied
    Thank you!

    I did not replace mine. They are supposedly one time use though. The nuts just have "locking material" (nylon?) in them from what I can tell. Maybe someone else can chime in on this but mine haven't moved and are fine.

    Leave a comment:


  • jbruch694
    replied
    Alright thanks. One more question, if I JUST replaced all of the lock nuts (i.e. top strut mount nuts, ball joint nuts, tie rod nuts, and shock nuts, will I have to get all new ones again or can I get away with reusing them, maybe with some loctite?

    BTW nice ride, we have the same color, year and model!

    Leave a comment:


  • tonerrrr
    replied
    You should be fine man, I drove for a week or two (I only really work on my cars weekends) and it was all good.

    Yes although not as immediately important, you want the #4 to make sure the top nut doesn't move!

    Leave a comment:


  • jbruch694
    replied
    Awesome, thanks. I actually noticed movement like that when I was testing it and I noticed that terrible noise once I drove it. I must have just totally spaced while putting the struts back together cause I forgot #4 as well, though that isn't nearly as important. Did you see anything screwed up when you fixed it or did you just throw the washer on and be done with it?

    Leave a comment:


  • tonerrrr
    replied
    Those washers are required... this was what my car was doing:



    This is the washer #8... this pic is from an M3 realoem.com but it should be similar if not the same:

    Leave a comment:

Working...