shocks for h&r race

[dirtrider372]

Now that my bushing are finally on their way, I'm getting ready to freshen up the suspension. I'm planning on getting H&R race springs. I was planning on getting bilstein sports front and rear. I then read that the compression dampening is too fast for higher spring rates, which causes a bouncy ride. What is R3V's opinion on this, do people recommend other shocks for use with these springs?

Thanks,

Ryan

[Andy.B]

Check out the Camaro shock sticky for some other, cheaper, options.

Sent from my Galaxy Nexus

[jlevie]

Bilstein Sport shocks are a good match to H& Race springs. That combination does not result in a bouncy ride, though the spring rates are pretty high for a daily driver.

[dirtrider372]

Check out the Camaro shock sticky for some other, cheaper, options.

Sent from my Galaxy Nexus

The camaro shocks are a possiblity for the rear, but I'll still have to figure something out for the front.

[Todd Black 88]

Toyota mr2 fronts apparently fit

[Andy.B]

Kyb agx Mr2 strut inserts, which are available for about $90, can be run in the front with a spacer, our cut/welded strut tubes. Rears are apparently longer, and require a smaller spacer, but are stiffer than the shorter front inserts.

I just picked up a set to try out, but can't vouch for them in this application, since I haven't installed then yet. Others seem to be happy with the combo.

I do have kyb agx shocks with h&r race springs in my na miata. I love the ride and adjustability, but I realize that is an apples to oranges comparison.